The XDeep 3D Mesh Pads are available as a complete set, or if you prefer, you can buy back or shoulder pads separately.

Shoulder and Back Pads add extra comfort to your XDeep wing system. The XDeep 3D Mesh Pads are neutrally buoyant and won’t compress at depth.

How to attach XDeep 3D Mesh Pads?

The backplate pad will come with 6 bolts, 6 nuts, 6 metal washers and 6 nylon washers. Once you place the back pad on the backplate the fabric flaps (3 on each side) will fold to the back of the backplate.

The top and bottom flaps with bolt holes will align with the very top and bottom holes on the XDeep backplate and the middle flap will find its place.

Slide the bolt in through the flap and then the backplate hole with the thread end facing the diver. Back of the bolt is facing out towards the wing, which will be put in place. Then slide the nylon washer from the diver side towards backplate, followed by the metal washer and finally the bolt nut. The pressure will keep the pad in place once the nut is tightened.

Effectively the pad will be held in place against the backplate at 12 points, 6 to either side.