Wynn’s Black Gasket Maker 200ml

• Flexible high temperature silicone sealant
• Effective replacement for other gaskets such as cork, rubber and felt
• Suitable for replacement gaskets for water pumps, light fittings, and so much more
• Withstands transmission fluids, water, oil and antifreeze
• Non harmful for catalytic converters and electric sensors

Solve the problem of leaky joints from worn gaskets by using Wynn’s Black Gasket Maker as a replacement for a secure and long lasting seal. Made from high quality, RTV Silicone, Wynn’s Black Gasket Maker flexibly works with a vast number of temperatures and comes in a double-piston aerosol powercan for the ultimate finger tip flow control, providing a professional finish.

How to use:

1. Ensure area is steady, clean and any oil, grease and old gasket matter is removed.
2. Take cap off by strongly yanking.
3. Swivel flow control adjoining trigger to approximately 10mm.
4. Put the nozzle at the opening of joint to be repleted.
5. Press trigger and move nozzle along joint/surface using one smooth action.
6. Rotate flow control for an even and steady flow.
7. When terminating use, put flow control back to original position shown by MIN and put cap back on to avoid curing in nozzle.
8. If joint is to be demolished in the future, delicately apply oil onto one area and bolt down. Avoid overtightening bolts.

Storage instructions

• Do not use on head gaskets or parts needing regular absorption in petrol.
• Avoid use in joints deeper than 10 mm

Features

• Resists temperatures to 260C intermittent, 232C continuous
• Application temperature range: +5 to +40C
• Appearance : Non-Sag black paste
• Density: 1.03