The Hollis ST 22 Travel Wing System with an aluminium backplate is an excellent choice for warm water diving and travelling. This single tank wing system comes pre-assembled from the factory.

Hollis designed the system for minimalist-minded divers who prioritise streamlining their kit for the ultimate in traditional simplicity.

The foundation for the ST system starts with the Hollis Aluminium Backplate 2.0 with geometry and material choices tailored to your style of diving. Hollis then added a continuous-weave Solo Harness. It has no buckles that can fail and no extra parts that you dont need.

An ultra-streamlined single-tank Hollis ST 22 Wing rounds out the system with a perfect horizontal trim and surface floatation.

Hollis ST 22 Travel Wing System includes

• Hollis ST 22 Wing with LP Hose
• Solo Harness with Aluminium Backplate 2.0
• Backplate Backpad 2.0
• Two Cambands with Plastic Buckles

Optional Hollis LX2 Weight System sold separately

Hollis ST 22 Wing

The design of the Hollis ST Wing for single-cylinder diving features a 360-degree tapered profile. This increases lift towards the hips, promoting better horizontal trim in the dive position while allowing perfect surface floatation.

Tank slots and tank cradle are included, allowing you to connect your wing and backplate without needing a single tank adapter plate. This reduces weight and unnecessary accessories while travelling.

The lower OPV is easy to reach for venting gas while horizontal or heads down, and the inflator design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to.

• Lift capacity: 22lbs/10kg
• Welded flange and one-piece retainer for servicing without the need for tools
• HD Laminated 1680D Cordura outer shell
• 420 nylon internal bladder
• Elbow offset to avoid tank valve or regulator interference
• Lower left pull relief valve
• Cam band slots & tank cradle built-in

Hollis Aluminium Backplate 2.0 with Solo Harness

The Hollis Aluminium 2.0 Backplate with the Hollis Solo Harness is clean and simple. The continuous one-piece harness system limits failure potential and enhances streamlining.

The backplate features improved ergonomics for a more comfortable fit but is still short enough to fit smaller frame divers. It is laser cut and CNC bent, which gives this awesome new appearance.

HARNESS

• Crotch Strap with a D-ring
• Shoulder Pads
• Stainless Steel Buckle
• Inflator O-ring Retainer
• 7 x Stainless Steel bent D-rings
• 9 x Stainless Steel Tri-Glides
• 7 x Snoopy Loops

BACKPLATE

• EN AW 6061 Aluminum, Thickness 3mm
• Hard Anodized, Black Marine Grade
• Improved Ergonomics Comfortable Fit
• Weight 680g / Size 29.5cmx42cm

Optional Hollis LX2 Weight System

LX2 Weight System has a simple pinch-and-pull buckle and a large nylon handle on the pouch to ditch or carry the weights.

The pouch itself is zippered and can hold up to 12 pounds total but is partitioned to isolate weights within the pouch. The benefit is that the partition will avoid weight shifting during the dive if the pouch is only partially filled.