The Halcyon Focus 2.0 umbilical dive light will function for up to 2.5 hours in high mode or 5 hours in low mode, making it ideal for a weekend of diving or any dive with extended bottom and decompression times.

Its adjustable beam ranges from narrow “technical/signalling” mode to very wide mode.

The black Halcyon Focus 2.0 torch uses two reflectors and a Fresnel lens to provide full focus adjustability, delivering exceptional output while significantly reducing power consumption.

The torch has three sealed compartments, isolating the LED core, the driver, and the cable gland. High-performance capacity is further enhanced by a fully adjustable handle that can be set for left or right-hand operation and folded over the lens for protection during transport.

These distinctive features are powered by a compact yet powerful battery.

Buy with confidence from Europe’s #1 Halcyon Dealer

Halcyon Focus 2.0 Torch Features

• High Setting: ~80,000 Lux at 1 metre / 1,550 Lux at 5 metres
• Low Setting (Half Power): ~39,000 Lux at 1 metre / 775 Lux at 5 metres
• Adjustable beam angle from narrow to wide
• Adjustable power switch may be set to Off, Low, or High power
• Adjustable handle, folds on lens during transport
• With integral harness/belt loop
• 2.5 hours burn time on high mode
• 5 hours burn time on low mode
• Easy to charge on cradle
• Delrin canister
• 5.2-amp Lithium battery pack
• Cord length 108cm (both standard and e/o cord)
• Slightly wider than a Halcyon LED Scout backup
• Charger included

Halcyon Charger

Halcyon Focus 2.0 torches come with a compact and practical wall charger.

The total weight of the charger is 202g, making it ideal for the travelling diver. The class 2 battery charger works on 100-240V with an output of 12.6V (1.0A) and can be used worldwide. All you need to do is unscrew the battery from the lamp head, connect the charger and screw the battery into the one-pin charge point.

Wallplug adapters are supplied with the appropriate plug/adapter for the region you place your order.

Halcyon Measuring Diving Light

Halcyon prefers to describe diving lights using lux because this provides a gauge of intensity at a given distance, which is probably more relevant while diving or during signalling. Halcyon typically tests lux output at one, three, and five meters from the light source. These distances appear useful when evaluating intensity for general use and while signalling a dive buddy.

A lux measurement that is very close to the light source will be higher than a lux measurement recorded farther from the same light source because light diffuses as it gets farther from the source. Therefore, you can think of lumens as the amount of light available and lux as the lumens that are actually arriving at the intended target.

Focus 2.0 Tightest Beam (Surface)

When switched on at its tightest beam the Halcyon Focus 2.0 will produce a square beam with a halo around it. The beam will reflect 4x LEDs with a darker “cross” in between which will disappear when the beam is slightly tuned out as below. Left: Beam at distance, Right: Beam closeup.

* Note that switching on the Focus 2.0 may cause interruptions and/or fully interrupt the frequency range of DAB (radio) at close distance

• All images 2023 DirDirect

Why Choose DirDirect?

• Pioneering Halcyon in the UK: For nearly 25 years, we’ve been the UK’s premier Halcyon dealer, leading the way by being the first to import and invest in their dive systems. Our consistent award-winning performance speaks to our deep expertise.
• Extensive Halcyon Inventory: Visit our dedicated technical diving and Halcyon showroom at our physical store to explore the UK’s largest in-stock selection of world-leading diving products.
• Shared Diving Philosophy: Our unwavering commitment to Halcyon stems from a shared dedication to cutting-edge technology and the enduring diving ethos they established, which many training agencies are now implementing.