Like the Hollis ST Travel, the Hollis ST 22 Elite Travel Wing System with an aluminium backplate is an excellent choice for warm water diving and travelling. This single tank wing system comes pre-assembled from the factory.

However, instead of the Hollis Solo Harness, the Hollis ST Elite comes with a luxurious and adjustable Elite 2 Harness, yielding a result similar to what youd expect from a full-featured BCD.

So if youre from the recreational world of single tank diving using a traditional BCD, this gives you that same harness style but on a backplate for added stability.

The ST Elite System also gives you many options to customise depending on your diving style if it changes over time.

Hollis ST 22 Elite Travel Wing System includes

• Hollis ST 22 Wing with LP Hose
• Elite 2 Harness with Aluminium Backplate 2.0
• Backplate Backpad 2.0
• Two Cambands with Plastic Buckles

Hollis ST 22 Wing

An ultra-streamlined single-tank Hollis ST 22 Wing rounds out the Hollis ST 22 Elite Travel Wing System with a perfect horizontal trim and surface floatation.

The design of the Hollis ST Wing for single-cylinder diving features a 360-degree tapered profile. This increases lift towards the hips, promoting better horizontal trim in the dive position while allowing perfect surface floatation.

Tank slots and tank cradle are included, allowing you to connect your wing and backplate without needing a single tank adapter plate. This reduces weight and unnecessary accessories while travelling.

The lower OPV is easy to reach for venting gas while horizontal or heads down, and the inflator design is a K style with a rugged crushproof rubber hose for easy positioning and oral inflation should you need to.

• Lift capacity: 22lbs/10kg
• Welded flange and one-piece retainer for servicing without the need for tools
• HD Laminated 1680D Cordura outer shell
• 420 nylon internal bladder
• Elbow offset to avoid tank valve or regulator interference
• Lower left pull relief valve
• Cam band slots & tank cradle built-in

Hollis Aluminium Backplate 2.0 with Elite 2 Harness

The Hollis Aluminium Backplate 2.0 with the Hollis Elite 2 Harness offers all the features of a technical harness with the added comfort that recreational divers seek.

Adjustable shoulder straps with quick-release buckles provide easier donning and doffing of equipment. Adjustable and removable shoulder pads w/ 3 adjustable stainless steel bent D-rings on each side.

The backplate features improved ergonomics for a more comfortable fit but is still short enough to fit smaller frame divers. It is laser cut and CNC bent, which gives this awesome new appearance.

HARNESS

• 316 marine grade stainless steel used for all hardware waist buckle
• Adjustable sternum strap included allows for a custom fit
• Harness weight: 770g

BACKPLATE

• EN AW 6061 Aluminum, Thickness 3mm
• Hard Anodized, Black Marine Grade
• Improved Ergonomics Comfortable Fit
• Weight 680g / Size 29.5cmx42cm