The OMS SmartStream Quick Adjust Assembly allows a continuous loop, one-piece harness to be used as an adjustable one which will fit most harnesses and work with any 2-inch wide webbing.

This quick-adjust system was developed to alleviate adjustment challenges that may arise while donning a heavy rig. B

y pulling the waist straps forward, the shoulder straps secure to the divers shoulders and back – allowing proper adjustments to be instantly achieved.

This assembly is available with stainless steel or aluminium hardware.

How OMS SmartStream Quick Adjust Assembly works

• Each webbing strap is threaded through either side of the backplate at the waist point and held in place with tri glides.
• The metal loops face inwards towards the diver and are held fixed by the straps.
• The waist strap of the harness is then threaded through the loops and then the sockets of the OMS straps. It will slide through that way.
• Buckles and D-rings then lock it into a maximum adjustment position so it cannot fully slip out.

We also have the Smartstream harness kit that comes with the quick adjust assembly if you are starting from scratch to add a harness system to your backplate.

If you want to read more about adjustable harness systems check out our blog on adjusting 1 piece harnesses without a break.

Were the UKs leading OMS dive equipment stockist and retail outlet. If there is anything you need but cannot find on our site, contact us directly, and well help you find it.