Turtle Wax Zip Wax Super Concentrate Car Wash Shampoo & Clean Shine 5 Litre Zip Wax is the world's most popular car wash and wax. Its unique fast acting formula deep cleans, shines and adds Turtle Wax in one easy step to give your car a shining, streak fre
Flash Sale Ongoing
Zip Wax is the world’s most popular car wash and wax. Its unique fast acting formula deep cleans, shines and adds Turtle Wax in one easy step to give your car a shining, streak free finish every time.
For ultimate convenience and value, Zip Wax is super concentrated, so you only need a cap for a fantastic finish.
Zip Wax Super Concentrate has been specially developed to provide outstanding value as well as exceptional cleaning performance.
MANNOL DPF Regenerator & Flush Fluid 9995 / 9996
DPF Regenerator & Flush Fluid a professional set of tools for gentle cleaning and restoring the efficiency of diesel particulate filters (DPF) without dismantling them. Suitable for all diesel engines, both naturally aspirated and turbocharged, equipped with these systems. Applicable for diesel engines equipped and not equipped with automatic regeneration systems for diesel particulate filters. Suitable for all DPFs. The product is applied to the particulate filter using a sprayer with a compressor.
DETAILS:
1. Stage with the use of DPF Regenerator 9995: Stop the engine. Cool the diesel particulate filter to less than 40 C. Pour the entire amount of the product into the spray container. Remove one of the particulate filter sensors (pressure or temperature). Insert the spray gun into the orifice. Spray the entire volume of the product in the particulate filter at a pressure of 4 BAR. Leave to act for 20 minutes. Replace the sensor. Place the container under the exhaust pipe to collect dirt. Turn on the engine and let it run at high speed (approximately 3000 rpm) for 5 minutes, while the exhaust pipe may leak dirty black liquid.
Stop the engine. Cool the diesel particulate filter to less than 40 C.
2. Stage with application of washing liquid 9996 DPF Flush Fluid: Pour the entire amount of the product into the spray container. Remove one of the particulate filter sensors (pressure or temperature). Insert the spray gun into the orifice. Spray the entire volume of the product in the direction of the particulate filter at a pressure of 4 BAR. Leave to act for 1-2 minutes. Insert the sensor into place. Turn on the engine and let it run at 2000 2500 rpm for 5 to 15 minutes until the product completely evaporates from the filter. During the cleaning process, foam flakes may escape from the exhaust pipe. Stopping the foam output indicates complete evaporation of the product.
After cleaning is complete, you need to drive for 20-30 minutes on a flat road with an engine speed of about 3000 rpm (it is allowed to let the engine idle for 20-30 minutes with a warm-up to the operating temperature). After that, for the best effect, start the process of forced (manual) regeneration of the particulate filter in accordance with the instructions of the car manufacturer.
To keep the particulate filter clean, use the 9994 MANNOL DPF Filter Cleaner in the future between service periods.
Reviews
There are no reviews yet.